2. Pro Audio
3. Live Sound
4. PA Speakers
5. CLA406.2A

2-way Active Line Array Column - 4x6” + 1.4”

2-way Active Line Array Column - 4x6” + 1.4” - 900Wrms, 133dB

The Vertus CLA 406.2A comprises four custom 6.5" inch woofers with 1.5" voice coils and a 1.4-inch large format Neodymium compression driver with a 2.5-inch voice coil with a 100 H x 25 H degree dispersion. The built-in amp module delivers 600W for the LF section and 300W for HF for 133dB SPL Designed to be used with the CLA 118SA.

FBT Vertus CLA 406.2A 2-way Active Line Array Column, the increased demand for an easy to set-up, sonically superior portable sound reinforcement system has prompted FBT to introduce a new version of the renowned VERTUS CLA460A active column array.

The launch of the new VERTUS columns follows a steep rise in the use of the VERTUS CLA406A for mobile sound reinforcement applications and installation – a trend spurred on by the column’s depth of versatility and audio performance. Now making life easier for those on the road, both the CLA406.2A and more compact CLA206A have been designed with portability in mind, from the rugged hardware to new accessories which make set-up both extremely quick and highly intuitive.

Bi-amplified 2-way line array
4 x 165mm (6.5 inches) custom woofers with 38mm (1.5 inches) coil
Neodymium B&C compression HF driver with 36mm (1.4 inch) throat and 64mm (2.5 inch) coil
Large format FBT waveguide with 100 degrees H x 25 degrees V dispersion
Frequency response from 65Hz to 20KHz
Class-D 600Wrms for LF and 300Wrms for HF amplifiers with switch mode power supply
DSP processor with 8 equalization presets
Control panel with XLR input and link, volume, presets, filter-HP, ground-lift
Neutrik PowerCON IN and LINK power connectors
Cabinet in 12mm (0.5 inches) birch plywood with scratch-resistant varnish, two side handles, rubber inserts for protection, and upper and lower anti-slip
4 lateral inserts, two upper and two lower points designed to accept quick release pins or M10 screws, and two rear M6 suspension points. New hardware for flying installations, for ground setups, and the possibility of coupling two or more CLA 406.2A / CLA 206A with an angle of 0 degree-20 degree in 5-degree steps vertically, all with optional quick release pins for touring.

Topside inclined by 10 degrees to have maximum flexibility of use in combination with other CLA 406.2A or CLA 206A in order to adapt the vertical dispersion angle of the system to the listening area.

The system can be used both in point source systems with the CLA 118SA sub and in vertical clusters, with the CLA 206A down-fill.

Features

• Configuration: 2 Way • Frequency response: 65Hz - 20kHz • Low frequency woofer: 6x 4" with 1" VC • High frequency driver: 1x 1.4" with 2.5" VC • Maximum SPL cont/peak: 133 dB • Dispersion: 100 x 25 • Input impedance: 22kOhm • Crossover frequency: 1.2kHz • Input connector: XLR with Link Out

• Net Dimension (WxHxD): 190 x 1235 x 290mm • Net Weight: 27kg • Transport Dimension (WxHxD): 290 x 1235 x 390mm • Transport Weight: 32kg • AC Power requirements: 640VA • Built-in amplifier LF/HF: 900w (600w LF + 300w HF) • Built-in amplifier peak LF/HF: 1800w (1200w LF + 600w HF) • Power cord: 5m PowerCon True1