Model: DIB-443

The Sidekick Passive DI Box by Hosa Technology makes it easy to connect your guitar, bass, or keyboard directly to a mixing console! It features an isolation transformer that transforms an instrument-level signal to a line-level signal. Use the Sidekick to 'go direct' for a pure, clean, noise-free tone that is perfect for Digital Signal Processing (DSP) or throw the Inst/Line switch to Line position to allow your amp to drive the line for a natural, overdriven tone. Either way, it's your sound all of it.

Model: DNX-545M

Route Cabling and Signals Effectively Hosa DNX Series Extenders offer smart combined routing for analog and digital audio signals or your data. It’s no secret that cable management gets tedious with multimedia setups. That’s where all-purpose DNX Series Extenders shine by letting you streamline connections and pass signals through a single Cat 5 Ethernet networking cable. DNX Series Extenders come in 3- or 5-pin male or female configurations, each housed in a galvanized steel enclosure that’s built for long-haul service. You can choose from models with an XLR or DMX/AES3 matrix that’s perfect for professional stages, conference rooms, or small businesses. Because DNX Series Extenders let you combine signals near the source, cable management consultants at GearNuts turn to these devices when it’s time to rein in cluttered cables with a centralized device. Choose Hosa DNX Series Extenders and upgrade your cable management plan today!Hosa DNX-545M DMX Extender Features: Combine

Model: ODL-312

Mix-down or transfer of digital recordings from one manufacturer's digital recorder to another's isn't always straightforward. Some digital work stations, sound cards or DAT recorders have S/PDIF optical outputs, and some offer only AES/EBU inputs, or vice versa.

The ODL-312 by Hosa is a high quality, converter, allowing simultaneous transfer of two channels of digital audio in either format in both directions. the Hosa ODL-312 converts between AES/EBU (XLR) and S/PDIF (TOSlink fiber optic). With the Hosa ODL-312 you can make transfers without leaving the digital realm. The Hosa ODL-312 is an indispensable tool for the digital recordist!

Model: SLW-333

1/4 in TRS to 3 x 1/4 in TRS

The SLW-333 Audio Switcher by Hosa Technology provides three signal routing options, eliminating the need to re-wire equipment. It is ideal for comparing an audio mix on three sets of powered studio monitors, or for switching between three stereo sources on one pair of monitors. Features include:

• 1-In, 3-Out or 3-In, 1-Out operation for maximum versatility
• Noiseless switch for quick and easy comparisons
• Steel enclosure for rugged durability

This device is intended for line-level signals only, not for speaker-level signals. Do not connect this unit between power amplifiers and speakers.

Connectors: 1/4 in TRS to 3 x 1/4 in TRS

Model: ADI

The Live Wire ADI Active DI Direct Box offers you 1/4" high impedance input and throughput, balanced XLR output. Ground lift switch, 0/-20/-40dB attenuation switches. Powered by 9V battery or 48V phantom power. Heavy-duty, all-steel chassis, rubber skid pad.

In addition to cable products, Live Wire has taken expertise in audio interconnection and applied it toward a variety of tools that assist in common solutions for sound professionals. Encompassing equipment for studio and stage, Live Wire Solutions use the same no-compromise design philosophy used for their cables, with high-quality parts and attention to detail that make them dependable for crucial applications. For answers to your everyday challenges in music, your solution is simple: Live Wire Solutions.

Model: PDI

The PDI double-shielded D.I. box provides increased protection against noise and interference. Features 1/4" high impedance from instrument wired in the panel. Makes no difference which is used for input or output. 1/4" high impedance goes to your amp when input/output is used as a loop. Balanced and floating low-impedance XLR goes to your workstation or mixing console, and ignores +48V phantom power. The Lift mode severs ground connection between the input and the XLR output and ground remains connected in GND mode.

Model: SPDI

The SPDI passive direct box from Live Wire Solutions features a 1/4" high impedance instrument input and output plus balanced and floating low-impedance XLR output that ignores +48V phantom power. Variable attenuation provides maximum input flexibility, while Lift mode severs ground connection between the input and the XLR output. GND mode leaves ground connection intact between input and XLR output. MORE»

Model: DB1000

Our DB1000 Active DI Box converts any high-impedance 1/4" source to a low-impedance XLR signal ready to send via a long cable run to a mixer or PA system. Features include a -15 dB pad switch to prevent clipping, a throughput connector to pass unaltered signal to a stage amp, and a ground-lift switch to defeat ground-loop hum. Its heavy-duty metal enclosure protects the internal components and ensures reliable performance.