CM-502 Black Overhead Hanging Microphone (Supercardioid) For suspended installations, especially suitable for applications in which a direct microphonic effect is undesired for optical or operational reasons, e.g. sound pickup of choirs or on theatre stages or school stages Microphone cartridge with super-cardioid polar pattern Integrated phantom power supply adapter Easy installation and alignment due to supplied mounting plate for ceiling suspension and spring holder Supplied with windshield MORE»
| List | $167.00 |
CM-502WT White Overhead Hanging Microphone (Supercardioid) For suspended installations, especially suitable for applications in which a direct microphonic effect is undesired for optical or operational reasons, e.g. sound pickup of choirs or on theatre stages or school stages Microphone cartridge with super-cardioid polar pattern Integrated phantom power supply adapter Easy installation and alignment due to supplied mounting plate for ceiling suspension and spring holder Supplied with windshield MORE»
| List | $167.00 |
CS-120CH Chairman Desktop Microphone. The CS-120CH has extra functions besides those CS-120DU has. There is a priority key that can either mute or turn off all delegate units, or cancel all applications. The chairman unit has the right to accept or refuse to apply. The voting function can be initiated only by the chairman unit. The timing is also controlled by the chairman. The voting result shown on all units will be clear. In one installation only one CS-120CH chairman unit can be connected. MORE»
| List | $650.00 |
CS-120DU Delegate Desktop Microphone. The CS-120DU is the basic delegate unit. Under the control of CS-120CU, there are 4 types of operation modes. 3 key voting function is available. The voting results can be read on the LCD screen. There are two lengths of detachable gooseneck microphone and three types of capsules for choices to meet various requirements. ф3.5 mm earphone output and microphone input phone jack is provided. MORE»
| List | $650.00 |
CS-1CH Chairman Desktop Microphone Station The chairman unit not only provides the same function as the delegate unit but also supports the addition of a “Priority button”, that enables the chairman to control the discussion by temporarily or permanently overriding and deactivating all active microphones of the delegate units. Microphone station for chairperson Back electret cartridge with a cardioid polar pattern optimized for voice transmissions Low-distortion speaker Reproduction via optional headphones Large function button Status displays at microphone and desktop station Priority button allows interrupting an ongoing discussion between conference delegates, alternatively with a chime MORE»
| List | $272.00 |
Conference System CS-1 Your opinion will be heard! The control unit CS-1CU, the microphone station for the chairperson CS-1CH and the microphone station for conference delegates CS-1DU together form a conference system with extensive configuration facilities for maximum flexibility. Control unit, the control center of the conference system For setting up a system with up to 50 microphone stations (2 x 25) Power supply for microphone stations Built-in speaker Headphone connection Keypad lock Display of date/time Stopwatch Test function for connected microphone stations Connection facilities for optional devices, e.g. external microphone, telephone coupler, signal processing units (e.g. equalizer), recorders, amplifiers, audio line sources MORE»
| List | $495.00 |
CS-1DU Delegate Desktop Microphone Station The delegate unit enables the attendants to participate in a discussion by speaking through a microphone, controlled by a microphone ON/OFF push-button, and listening to the discussion by the internal loudspeaker and external headphones. MORE»
| List | $272.00 |
CX-500 Subminiature Condenser Instrument Microphone (Omni) The CX-500 provides clean, detailed, and natural sound quality with a subminiature condenser capsule. The tailed response curve works best with string instruments like violin and guitars besides many other instruments. Various mount kits are bundled for the best fit for any kind of instrument. With sophisticated capsule technology and tailored fixtures, the CX-500 can pick up every trill of strings. The bundled MA-500 adapter makes CX-500 capable of both wired and wireless applications. MORE»
| List | $139.00 |
The CX-500DU deploys dual transducers. It pushes miking boundary to a new edge. Every thrill and vibration will be royally reproduced. By moving the microphone a user can get clear and sharp, warm and spacious sound or the combination. Moreover a user can adjust the balance between the two transducers through bundled power module and find the favorite mix. The hi-tech adhesive renders the desired positioning yet no scratch or paint damage will be caused. CX-500DU is ideal for string instruments. MORE»
| List | $139.00 |
CX-500F Condenser Instrument Microphone for Flute (Omni) The CX-500F is an omnidirectional condenser Flute microphone. Supplied with an innovative, glueless fastening system (for flute tube diameter: 18-26 mm). 4 pins mini XLR which connects to optional JTS wireless belt packs to go wireless. MORE»
| List | $159.00 |
CX-505 Condenser Drum & Percussion Microphone (Cardioid) State-of-the-art microphone for drummers and percussionists Brilliant sound which is always accentuated and powerful, even at great dynamic gaps Clamp with rubber jaws, to be attached to the rim of drums Miniature gooseneck can be turned by 230° Suppression of structure-borne noise Supplied in a robust transport case MORE»
| List | $175.00 |
CX-506 Condenser Drum & Percussion Microphone (Cardioid) The CX-506 is a Condenser Instrument microphone. The Miniature profile makes it unobtrusive for the musician. The shock mount clip-on clamp with spider suspension ensures secure mounting on drum rims, percussion instruments, and cymbal stands in either a horizontal or vertical position without unwanted resonance. Standard XLR connection. Phantom power is required. Supplied in a robust transport case * The unique design and miniature profile provide for minimal physical size interference for the musician. * Low noise electronic circuitry together with balanced output provides isolation from ambient noise. * The shock mount clamp greatly reduces extraneous mechanical noise and ensures secure mounting on drum rims, percussion instruments, and cymbal stands in either a horizontal or vertical position. * Excellent natural reproduction of drums and percussion, accurately and purely without coloration. * Newly added spider suspension isolates unwanted mechanical vibration effectively. MORE»
| List | $175.00 |
CX-508 Condenser Winds Microphone (Cardioid) The JTS CX-508 Miniature clip on condenser microphone is designed for the miking of brass and woodwind instruments. Its flat response with a slight presence peak in the upper frequencies ensures natural and bright reproduction without coloration. * The lightweight miniature profile provides minimal physical size interference for the performer. * Spring type clamp with elastic grip and adjustable gooseneck for secure mounting on the horn without scratching or marring delicate instrument finishes. * Clip on design allows optimal placement position thereby eliminating the use of mic stands, reducing stage clutter and set up time. * Outstanding for saxophone, brass, woodwind instruments. * Extended frequency response and wide dynamic range for pure and natural sound without coloration. * Excellent shock-mount design for superior isolation from shock and vibrations. * Flexible gooseneck together with adjustable axis allows accurate positioning. * Newly added spider suspension isolates unwanted mechanical vibration effectively. MORE»
| List | $175.00 |
CX-516 Condenser Instrument Microphone for Strings (Cardioid) The JTS CX-516 is a high-quality, miniature unidirectional condenser microphone designed for studio recording, broadcasting, and sound reinforcement. Its wide frequency response and low noise characteristics have made it a standard for use with acoustic string instruments: violins, cellos, upright basses, as well as woodwind instruments, accordions, and organ (Leslie) cabinets. The tailored sound characteristics and superb transient response allows detailed transparent reproduction of the sound source. The mini flexible gooseneck design provides quick pinpoint miking via the built-in mounting clip. * Newly added spider suspension isolates unwanted mechanical vibration effectively. MORE»
| List | $149.00 |
FGM-170 Floor Stand Microphone with Carbon Boom 170cm stand This product has the same mics as the GML series and includes three capsules: omnidirectional, cardioid, and super-cardioid. The very light carbon boom makes remote miking an easy job. A cable with mini XLR and XLR on each end is supplied. Low cut switch (80 Hz) 10 dB attenuation, switchable Extra lightweight (105 g) but very robust carbon fiber boom (1.46 m) with miniature gooseneck Structure-borne noise isolated diecast base plate Application: * Choirs * Presentation * Also as a normal mic stand FGM-62 Carbon: With a mic stand height of 62 cm, the rest is identical to FGM-170 Carbon. MORE»
| List | $419.00 |
FGM-170T Floor Condenser Microphone (Cardioid) with Carbon Boom 170cm stand. High-quality condenser microphone cartridge with 1.25 cm (˝") extra thin gold-plated diaphragm, cardioid polar pattern, and excellent sound characteristics Low cut switch (80 Hz) 10 dB attenuation, switchable Extra lightweight (105 g) but very robust carbon fiber boom (1.46 m) with miniature gooseneck Long shaft, for overhead miking Structure-borne noise isolated diecast base plate Replaceable cartridge unit and cartridge (plug-in system with screw-type locking) Supplied with windshield Delivery consists of 2 boxes Application: * Choirs * Presentation * Also as a normal mic stand FGM-170T: With a mic stand height of 170 cm, the rest is identical to FGM-62T. MORE»
| List | $495.00 |
FGM-170T Dual Floor Condenser Microphone (Cardioid) with Carbon Boom 170cm stand. Dual microphone version of FGM-170T floor condenser microphone. Microphone floor stand, with dual carbon fiber booms. High-quality condenser microphone cartridge with 1.25 cm (˝") extra thin gold-plated diaphragm, cardioid polar pattern, and excellent sound characteristics Low cut switch (80 Hz) 10 dB attenuation, switchable Extra lightweight (105 g) but very robust carbon fiber boom (1.46 m) with miniature gooseneck Long shafts, for overhead miking Structure-borne noise isolated diecast base plate Replaceable cartridge unit and cartridge (plug-in system with screw-type locking) Supplied with windshield Delivery consists of 2 boxes FGM-170T: With a mic stand height of 170cm, the rest is identical to FGM-62T. MORE»
| List | $759.00 |
FGM-62 Floor Stand Microphone with Carbon Boom 62cm stand This product has the same mics as the GML series and includes three capsules: omnidirectional, cardioid, and super-cardioid. The very light carbon boom makes remote miking an easy job. A cable with mini XLR and XLR on each end is supplied. Low cut switch (80 Hz) 10 dB attenuation, switchable Extra lightweight (105 g) but very robust carbon fiber boom (1.46 m) with miniature gooseneck Structure-borne noise isolated diecast base plate Application: * Choirs * Presentation * Also as a normal mic stand FGM-170 Carbon: With a mic stand height of 170 cm, the rest is identical to FGM-62 Carbon. MORE»
| List | $399.00 |
FGM-62 Dual Floor Stand Microphone with Carbon Boom 62cm Stand. Dual microphone version of FGM-62 Floor Stand Microphone. This product has the same mics as the GML series and includes three capsules: omnidirectional, cardioid, and super-cardioid. The very light carbon boom makes remote miking an easy job. A cable with mini XLR and XLR on each end is supplied. Low cut switch (80 Hz) 10 dB attenuation, switchable Extra lightweight (105 g) but very robust carbon fiber boom (1.46 m) with miniature gooseneck Structure-borne noise isolated diecast base plate Application: * Choirs * Presentation * Also as a normal mic stand FGM-170 Carbon: With a mic stand height of 170 cm, the rest is identical to FGM-62 Carbon. MORE»
| List | $679.00 |
FGM-62T Floor Stand Microphone (Cardioid) with Carbon Boom 62cm stand. Microphone floor stand, with carbon fibre boom. High-quality condenser microphone cartridge with 1.25 cm (˝") extra thin gold-plated diaphragm, cardioid polar pattern and excellent sound characteristics Low cut switch (80 Hz) 10 dB attentuation, switchable Extra lightweight (105 g) but very robust carbon fibre boom (1.46 m) with miniature gooseneck Long shaft, for overhead miking Structure-borne noise isolated diecast base plate Replaceable cartridge unit and cartridge (plug-in system with screw-type locking) Supplied with windshield Delivery consists of 2 boxes FGM-62T: With a mic stand height of 62 cm, the rest is identical to FGM-170T. MORE»
| List | $429.00 |
FGM-62T Dual Floor Condenser Microphone (Cardioid) w/Carbon Boom 62cm stand. Dual microphone version of FGM-62T floor condenser microphone. Microphone floor stand, with dual carbon fiber booms. High-quality condenser microphone cartridge with 1.25 cm (˝") extra thin gold-plated diaphragm, cardioid polar pattern, and excellent sound characteristics Low cut switch (80 Hz) 10 dB attenuation, switchable Extra lightweight (105 g) but very robust carbon fiber boom (1.46 m) with miniature gooseneck Long shafts, for overhead miking Structure-borne noise isolated diecast base plate Replaceable cartridge unit and cartridge (plug-in system with screw-type locking) Supplied with windshield Delivery consists of 2 boxes FGM-62T: With a mic stand height of 62 cm, the rest is identical to FGM-170T. MORE»
| List | $713.00 |
JS-1 Large diaphragm studio microphone with included shock-mount. The JTS JS-1 is a studio microphone designed for use in the most demanding applications. A specially contoured 1” super thin 24K gold plated diaphragm provides superb reproduction of high sound pressure level signals at all frequencies. A switchable 10dB pad is built-in to increase the SPL capabilities. Its precise resolution and ability to handle high sound-pressure levels make it an excellent all-purpose microphone. Included with the JS-1 is a versatile shock mount with standard 5/8”-27 threads. MORE»
| List | $415.04 |
JS-1 Large-diaphragm condenser USB studio recording microphone. The JS-1 USB is an affordable Entry-Level Large Diaphragm Condenser USB Studio Recording Microphone. However, the sound quality is anything, but "Entry-Level". MORE»
| List | $305.24 |
JS-1E Budget Large Diaphragm Condenser Studio Recording Microphone. The JS-1E is an affordable Entry-Level Large Diaphragm Condenser Studio Recording Microphone. However, the sound quality is anything, but "Entry-Level". MORE»
| List | $229.00 |
JS-1T Multi-Pattern Large Diaphragm Condenser Studio Recording Microphone The JS-1T is a multi-pattern studio microphone with three selectable polar patterns: Cardioid, Omnidirectional, and Figure-8 providing superb performance for vocals, acoustic instruments, drum kits, percussion, etc. for either Live or Studio Recording. MORE»
| List | $524.84 |
JS-22 Studio Pencil 1/2" Condenser Microphone Professional condenser microphone, for studio applications and live performances. Ideally suited for direct or overhead sound pickup of acoustic instruments, percussions and vocals or 2 x JS-22 for high-quality stereo recordings. 1.25 cm (˝") extra thin gold-plated diaphragm Low cut switch (80 Hz) 10 dB attenuation, switchable 48 V phantom power Robust brass body Supplied accessories: hard-sided case, microphone windshield, and microphone holder MORE»
| List | $175.00 |
MA-500 Phantom Power Adaptor provides power to miniature condenser microphones through phantom power. It works with CM series condenser microphones and part of CX series microphones with mini XLR connector. MA-500/MA-500E can be powered by JTS’s PS-1, Phantom Power Supply or 12V to 48V phantom power from other devices. MORE»
| List | $45.00 |
NX-8.8 Vocal Condenser Microphone (Supercardioid) The NX-8.8 is created for studio-quality sound in live performance vocals. Smooth and tailored frequency response provides vividness, accuracy, and warmth for vocals. Excellent accurate pick-up pattern provides the best gain-before-feedback. A specially designed filter effectively minimizes breath pop, stand, and handling noise. MORE»
| List | $175.00 |
NX-9 Overhead Condenser Microphone (Cardioid) For various applications: sound pickup of hi-hats/cymbals/percussion instruments, microphone applications with acoustic instruments, e.g. guitars, violins, pianos or wind instruments Well-balanced and natural sound Operation via +48 V phantom power or via 1.5 V battery AA size (not supplied) Supplied with a microphone holder and padded bag MORE»
| List | $159.00 |
Designed to produce accurate, natural sound, our AS800 FET Condenser Mic reliably captures everything from vocals to acoustic guitars to kick drums. With an extended high-end presence, smooth mid range, and robust low end, this mic delivers detailed sound reproduction with the flexibility to handle diverse sources without distorting. For more professional-sounding recordings, a built-in low-cut switch enables bass roll off to reduce rumble and the included shock mount isolates the mic from external vibrations. A carrying case is included for protective, convenient transportation. This mic also comes with a carrying case for protective, convenient transportation and a storage pouch to keep the capsule free of dust. MORE»
| List | $146.99 |
LoKI - USB 4 in 1 Condenser Microphone Choosing the right microphone is easy when you look at the unique features and design of LOKI. With 4 microphone polar patterns to suit virtually any set-up, the superior diaphragms will give you the ultimate quality, whether livestreaming or recording. Give yourself the best result with the benefits from the zero latency monitoring with headphones and one touch muting. To finish the look, LOKI can be set to suit your mood with built-in multi-colored LED lighting. Finished to the highest quality and coming complete with a unique space-saving adjustable table stand, LOKI is the perfect addition to your desktop. MORE»
| List | $219.00 |
Owning a multi-purpose condenser microphone is great, when with a simple switch you can change your polar pattern from uni (cardioid) directional, bi directional (where you pick up from the front and rear of the microphone) and omni directional so you pick up your recording from all directions. This makes them ideal for virtually any recording application from live performance, stage, orchestral recording or home/studio recording. M10C also features a high input SPL, high pass filter, and pad attenuation switch to make this microphone incredibly versatile. Large 34mm diaphragm uni, bi and Omni direction polar patterns 10dB pad attenuation switch 100Hz 6dB/oct high pass filter switch Balanced XLR connector MORE»
| List | $209.00 |
If you want to make a bold statement with your equipment, then the M10U special edition will give you a great-looking addition to your desk. Ideal for podcasting and home or studio recording. M10U special edition is a cardioid pattern condenser microphone that connects directly to your PC or laptop with a type-B to type-A USB cable (included), with no driver installation or additional hardware. Featuring studio-quality 24bit/96kHz conversion to achieve natural sound reproduction and to ensure every part of your sound source is clearly captured. Featuring studio-quality 24bit/96kHz conversion to achieve natural sound reproduction and to ensure every part of your sound source is clearly captured. MORE»
| List | $109.00 |
M12C is a high quality handheld condenser microphone, great for those times when you need to capture your recording without having to set up a condenser shock mount stand. Cardioid pattern condenser microphones where there is more sensitivity at the front of the microphone and a lot less at the rear and sides make them ideal for many applications including live performances and home/studio recording as they reduce the capture of unwanted noise. MORE»
| List | $209.00 |
Cardioid pattern condenser microphones where there is more sensitivity at the front of the microphone and a lot less at the rear and sides make them ideal for many applications including live performances and home/studio recording as they reduce the capture of unwanted noise. M15C with a high input SPL, high pass filter and pad attenuation make this microphone incredibly versatile. MORE»
| List | $399.00 |
M3C+SM1 - XLR Condenser Microphone w/SM1 - Shock Mount Cardioid pattern condenser microphones where there is more sensitivity at the front of the microphone and a lot less at the rear and sides make them ideal for many applications including live performances and home/studio recording as they reduce the capture of unwanted noise. Large 16mm cardioid pattern diaphragm Balanced XLR connector MORE»
| List | $119.00 |
